CANblue II Bluetooth

友情提示:(1)有问题: 可以点击 右边中-在线咨询,左侧qq,旺旺在线联系
         (2)感兴趣: 可以点击 左侧中-分享到

 

CANblue II

Intelligent CAN Module with
Bluetooth Interface
 

WEEE and RoHS conform The CANblue II is a CAN module that is connected to the PC wirelessly via Bluetooth. It is ideal for servicing and accessing CAN systems that are otherwise difficult to access. Depending on the space limitations, the 

CANblue II - CAN/Bluetooth Bridge and CAN-Bluetooth Module with ASCII/Binary Protocol and VCI support

maximum distance between the CANblue II and the PC/notebook can be up to 300 m.

Bridge mode
The bridge mode allows the user to set-up a CAN-Bluetooth-CAN bridge by using two CANblue II devices. Message exchange occurs on layer 2 and is transparent. The device can also be used in systems with CANopen, DeviceNet or customer-specific protocols. CAN-ID filters can be set for data exchange via Bluetooth. Using more than 2 CANblue devices, multiple busses can be linked with each other.

ASCII/Binary protocol mode
In this mode, functions for transmitting and receiving CAN messages and for configuring the CANblue II are available to the user based on simple ASCII commands and optimized CAN binary messages. The CANblue II is ideal for "non-Windows" systems or embedded platforms.

PC operation mode with VCI driver support
Because it is supported by the VCI CAN driver, the CANblue II can be operated with all IXXAT tools and with customer-specified programs. In addition, wireless access to CAN systems via Bluetooth can also be easily achieved with existing VCI-based application programs and tools.

Product highlights
- Quick start-up and connection
- High transmission range
- Low latency transmission
- High data throughput
- Flexible configuration options (combination of several CANblue II)

Technical Data

Bluetooth interface Bluetooth specification V2.1 EDR, 300 m max. transmission range
Microcontroller 32-bit microcontroller
CAN controller CAN 2.0 A/B
CAN bus interface ISO 11898-2, Sub D9 plug according to CiA 303-1
Galvanic isolation 1 kV, 1 sec.
Voltage supply 9 - 30 V DC, 0.6 W
Temperature range -40 ºC ... +85 ºC
Sending delay (average) approx. 4 ms (in Shortest Latency Mode)
CAN performance at 1 Mbit 100% bus load

Certification

CE, FCC, Telec

 

Housing Plastic housing with integrated antenna and mounting holes
Size 82 x 64 x 26 mm